METAL/SPIRAL WOUND GASKETS

Engineering Data/FAQs



Thicknesses and tolerances


Available Thicknesses
Winding Ring(s)
Inner & Outer
0.125" 3/32"
0.175" 1/8"
0.250" 3/16"
0.285" 3/16"


Tolerances

For spiral wound gaskets not otherwise specified.
Gasket
Thickness*    Tolerance		 Width Limits
Minimum    Maximum†		 Compressed
Thickness
0.125" ±0.005" 3/16" 1" 0.090-0.100"
0.175" ±0.005" 1/4" 1-1/2" 0.125-0.135"
0.250" ±0.005" 5/16" 1-1/2" 0.180-0.200"
0.285" ±0.005" 5/16" 1-1/2" 0.200-0.220"

*  Measured across the metallic portion of the gasket not including the filler, which may protrude slightly.

†  Spiral wound gaskets can be made to large maximum widths if required. Call Garlock for details.



WARNING:
Properties/application shown here are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.

Performance data published here has been developed from field testing, customer field reports and/or in-house testing.

While the utmost care has been used in compiling this information, we assume no responsibility for errors. Specifications subject to change without notice. This edition cancels all previous issues. Subject to change without notice.



Back to Metallic Gaskets