METAL/SPIRAL WOUND GASKETS

Engineering Data/FAQs



Effective Gasket Seating Width
Flange and Gasket Diagram N = Width of gasket
W = Width of contact area (raised face or serrations)
T = Thickness of gasket


B0 = Basic seating width of gasket
B1 = Effective seating width of gasket


* Where serrations do not exceed 1/64" depth and 1/32" spacing, choose 1b or 1d.


For Bo greater than 1/4 inch     For Bo less than/equal to 1/4 inch


HG = Gasket load reaction force
G = Diameter of gasket load reaction force
hG = Distance from G to bolt circle diameter



WARNING:
Properties/application shown here are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury.

Performance data published here has been developed from field testing, customer field reports and/or in-house testing.

While the utmost care has been used in compiling this information, we assume no responsibility for errors. Specifications subject to change without notice. This edition cancels all previous issues. Subject to change without notice.


Back to Metallic Gaskets