SPIRAL WOUND GASKETS
The Garlock EDGE®
Compare
Benefits
No Radial Buckling- STABL-LOCK™ inner wrap construction prevents sealing element from flowing into and contaminating process stream
- Garlock CONTROLLED DENSITY™ winding prevents bolt torque loss and requires less compressive force to seal
- Retaining groove grips winding firmly, maintaining symmetrical cross-section for most effective seal
- Modified guide ring ensures contact with all raised face surfaces
- Dual flange (DF) design accommodates both 150 and 300 lb flanges—reduces inventory costs
- Select from a wide variety of metallic and filler materials with a full range of temperature capabilities
| Gasket Style and Material |
"M" | "Y" (psi) |
Gb (psi) |
'a' | Gs (psi) |
| Garlock EDGE® with 304 stainless and flexible graphite filler |
2.00 | 5,000 | 793 | 0.4 | 0.31 |
Dual Flange (DF) Design
WARNING:
Properties/application shown here are typical. Your specific application
should not be undertaken without independent study and evaluation for
suitability. For specific application recommendations consult Garlock.
Failure to select the proper sealing products could result in property
damage and/or serious personal injury.
Performance data published here has been developed from field testing, customer field reports and/or in-house testing.
While the utmost care has been used in compiling this information, we assume no responsibility for errors. Specifications subject to change without notice. This edition cancels all previous issues. Subject to change without notice.
Copyright © Garlock Sealing Technologies