GASKETS

Engineering Data/FAQs



ASTM Callouts

ASTM F104 Line Call Out

(Based on 1/32" thickness)
Style ASTM Line Callout A9: Leakage in E99: % Increase in ASTM Fuel B K9: Thermal Conductivity M9: Tensile   Strength  
Fuel A,  (Isooctane)*     Nitrogen**  
ST-706 F712100A9B3E34K5M9 Typical: 0.5 ml/hr
Max: 1.5 ml/hr		 -- -- -- 1,400 psi min.
(9.7 N/mm2 min.)
3000 F712100A9B4E22K5M6 Typical: 0.2 ml/hr
Max: 1.0 ml/hr		 Typical: 0.6 ml/hr
Max: 1.5 ml/hr		 -- -- --
3124, 3125 SS and TC F516000A9B1M3 Typical: 0.2 ml/hr
Max: 1.0 ml/hr		 Typical: 0.5 ml/hr
Max: 1.5 ml/hr		 -- -- --
3200/3400 F712400A9B4E44K5M9 Typical: 0.1 ml/hr
Max: 1.0 ml/hr		 Typical: 0.4 ml/hr
Max: 1.0 ml/hr		 -- -- 2,250 psi min.
(15 N/mm2 min.)
3300 F712400A9B4E34K5M9 Typical: 0.2 ml/hr
Max: 1.5 ml/hr		 Typical: 1.0 ml/hr
Max: 2.0 ml/hr		 -- -- 2,250 psi min.
(17 N/mm2 min.)
3700 F712900A9B4E99K5M9 Typical: 0.1 ml/hr
Max: 1.0 ml/hr		 Typical: 0.7 ml/hr
Max: 2.0 ml/hr		 Weight: 100% max.
Thickness: 20-50%		 -- 2,250 psi min.
(15 N/mm2 min.)
CP-3900 F719240A9E43K4M6 Typical: 0.1 ml/hr
Max: 1.0 ml/hr		 Typical: 0.3 ml/hr
Max: 1.0 ml/hr		 -- -- --
CP-3920 F719560A9E66K4M5 Typical: 0.1 ml/hr
Max: 1.0 ml/hr		 Typical: 0.3 ml/hr
Max: 1.0 ml/hr		 -- -- --
IFG® 5500 F712100A9B2E23K7M5 Typical: 0.2 ml/hr
Max: 1.0 ml/hr		 Typical: 0.5 ml/hr
Max: 1.5 ml/hr		 -- -- --
IFG® 5507 F712500A9B2E36K9M5 Typical: 0.1 ml/hr
Max: 1.0 ml/hr		 Typical: 0.5 ml/hr
Max: 1.5 ml/hr		 -- 0.61 W/mºK
(4.27 btu•in./h•ft2•ºF)		 --
9800 F712400A9B2E34K8M9 Typical: 0.1 ml/hr
Max: 0.5 ml/hr		 Typical: 0.1 ml/hr
Max: 0.5 ml/hr		 -- -- 1,400 psi min.
(9.7 N/mm2 min.)
9850 F712200A9B2E22K8M9 Typical: 0.1 ml/hr
Max: 0.5 ml/hr		 Typical: 0.1 ml/hr
Max: 0.5 ml/hr		 -- -- 1,600 psi min.
(11 N/mm2 min.)
G-9900 F712100A9B2E22K9M5 Typical: 0.1 ml/hr
Max: 0.5 ml/hr		 Typical: 0.1 ml/hr
Max: 0.5 ml/hr		 -- 0.87 W/mºK
(6.0 btu•in./h•ft2•ºF)		 --

* Gasket load = 500 psi (3.5 N/mm2); internal pressure = 9.8 psig (0.7 bar).
** Gasket load = 3,000 psi (20.7 N/mm2); internal pressure = 30 psig (2 bar).

 

GYLON® Callouts1
GYLON® Style2 ASTM Line Callout Fourth Numeral 9: % increase in IRM Oil #903 Fifth Numeral 9:
% increase in IRM Oil #903		 Sixth Numeral 9: % increase in Water A9: Leakage in Fuel A (isooctane) E99: % Increase in ASTM Fuel B
3500 F451999A9B1E99K6M6 Thickness: 1.0% max. Weight: 2.0% max. Weight: 1.0% max. Typical: 0.22 ml/hr
Max: 1.0 ml/hr		 Weight: 2.0% max.
Thickness: 1.0% max.
3504 F456999A9B7E99K3M6 Thickness: 1.0% max. Weight: 2.0% max. Weight: 1.0% max. Typical: 0.12 ml/hr
Max: 1.0 ml/hr		 Weight: 2.0% max.
Thickness: 1.0% max.
3510 F451999A9B2E99K5M6 Thickness: 1.0% max. Weight: 2.0% max. Weight: 1.0% max. Typical: 0.04 ml/hr
Max: 1.0 ml/hr		 Weight: 2.0% max.
Thickness: 1.0% max.
35403 F419000A9B2 ---- ---- ---- Typical: 0.25 ml/hr
Max: 1.0 ml/hr		 ----
35453 F419000A9B3 ---- ---- ---- Typical: 0.15 ml/hr
Max: 1.0 ml/hr		 ----
HP 35604 F451999A9B1E99K6M6 Thickness: 1.0% max. Weight: 2.0% max. Weight: 1.0% max. Typical: 0.2 ml/hr
Max: 1.0 ml/hr		 Weight: 2.0% max.
Thickness: 1.0% max.
HP 35614 F451999A9B2E99K5M6 Thickness: 1.0% max. Weight: 2.0% max. Weight: 1.0% max. Typical: 0.04 ml/hr
Max: 1.0 ml/hr		 Weight: 2.0% max.
Thickness: 1.0% max.
3565 F457999A9B6E99M6 Thickness: 1.0% max. Weight: 2.0% max. Weight: 1.0% max. Typical: 0.33 ml/hr
Max: 1.0 ml/hr		 Weight: 2.0% max.
Thickness: 1.0% max.

  1. In all cases, gasket load = 1,000 psi (7 N/mm2) Internal pressure = 9.8 psig (.7 bar)
  2. For Styles 3500 through 3545, thickness is 1/32"; for Styles 3560 - 3565, thickness is 1/16".
  3. Third numeral 9: F36 Compressibility 3540: 70-85%, 3545: 60-70%.
  4. Line callout = OFMF9: 9 = perforated stainless steel,
    F= F451999A9B1E99K6M6 (HP 3560);
    F= F451999A9B2E99K5M6 (HP 3561)

 

Style1 ASTM Line Callout
660 F328148M4
681 F326128M6
3123 F517100B1M3

1. For these styles, thickness is 1/32"

 

Back to Gaskets